In Belgium, the company Visiotherm has identified the need to perform thermographic inspections of photovoltaic roofs on residential and industrial buildings in a more efficient way.
During their useful life, some solar panels develop defects, which can be corrected if detected in time through a periodic inspection with a thermographic camera.
Thermography is a technique well known to installers and maintainers of solar photovoltaic installations. By means of an inspection with a powerful thermographic camera such as
A FLIR thermal imaging camera allows you to inspect all mechanical and electrical components of wind turbines and the electrical distribution system. Using thermal imaging, you can check
The University of Edinburgh's competition team to the SpaceX Hyperloop Pod Competition uses the FLIR E4 thermal imaging camera and the ammeter clamp.
After the Research Center had a problem with a medium voltage circuit breaker that could not be detected by thermography because it was in the middle of the
The article discusses how they use thermography to detect break points in heavy industrial power or communications cables. Thanks to thermal imaging cameras
A transformer failure is a nightmare for companies, as they usually have a very high direct and indirect cost. Implementing thermography
In this case, the station has about 150 potential sources of leakage that need to be thoroughly checked using the FLIR GF77 camera, since
A SF6 gas leak in a circuit breaker is a technical, economic and environmental problem. The FLIR GF306 thermal imaging camera is designed to visualize the