IR monitor and IP configuration
FLIR IP Config is used to determine and set the IP address of FLIR network cameras, typically FLIR A3xx series, FLIR AX8 or FLIR A400/A700 smart cameras.
Older versions of IP Config are available for those who have problems running version 3.0 on their system. See the software downloads page for details.
Click to download the latest version of FLIR IP Config
Click to download the latest version of FLIR IR Monitor
FLIR IR Monitor can be used to install and configure the A310 and A300 cameras. This tool should be used for configuration only and is not intended for continuous video streaming.
Drivers
When using the A310 on Windows machines, it is necessary to download the following drivers:
Click to download FLIR Streaming Drivers 32-bit
Click to download FLIR Streaming Drivers 64-bit
If you have any doubts or questions, please contact us.