Description
Spray washable high emissivity paint for room temperature applications
Washable, high emissivity thermographic spray paint for special applications at room temperature. The paint can be easily removed with water without the use of aggressive mechanical methods or chemical agents. Ideal for measuring locations where permanent paint cannot be used. The guaranteed physical properties and the dependence of the emissivity on the wavelength and viewing angle of the camera allow you to achieve highly accurate non-contact temperature measurement results.
Elemental properties
| ✓ High emissivity paint ✓ Water washable ✓ Stable over time ✓ Almost opaque | ✓ Suitable for uncooled thermal imaging cameras and special applications ✓ Ecological ✓ Suitable for room temperature ✓ Suitable for applications on turbine blades, sheet metal, glass, floors, etc. |
Color: Black Volume: 400ml Yield: 0,5m2
Instructions for use
- Clean the surface, dry it and remove grease. Cover other areas where paint will not be applied.
- Shake the bottle for two minutes and make a test spray.
- Spray from a distance of 25-30 cm. Reapply 2 thin coats. Between coats, do not wait for the product to dry.
- Spray at a temperature of 15-25°C. The paint hardens after two hours.
- After use, turn the bottle upside down and clean the valve by pressing for a few seconds.
High emissivity thermographic paints allow accurate non-contact temperature measurement. Many materials (metal, glass, some plastics) with a shiny surface and high reflectivity, with unknown or low emissivity, cause inaccurate or impossible measurement with the IR camera. LabIR® Paints thermographic paints create a homogeneous layer with high emissivity for very accurate measurements.
For specially designed paints, LabIR® Paints is the only company on the market that guarantees the emissivity for a given wavelength, the dependence of the emissivity on the viewing angle and also other characteristics: mechanical resistance, optical impermeability, etc.
Ref.HEWP-LT-MWIR-BK-11