Description
High emissivity paint for standard applications
Special high emissivity thermographic spray paint for common applications up to 100°C. Precisely defined physical properties and the dependence of the emissivity on the wavelength and viewing angle of an infrared camera enable accurate non-contact temperature measurement results.
Elemental properties
| ✓ High emissivity paint ✓ High mechanical strength ✓ Almost opaque ✓ For daily use | ✓ Suitable for uncooled thermal imaging cameras ✓ For temperatures up to 100ºC ✓ Suitable for applications in electrical equipment (very low conductivity). |
Color: Black Volume: 400ml Yield: 0,5m2
Instructions for use
- Clean the surface, dry it and remove grease. Cover other areas where paint will not be applied.
- Shake the bottle for two minutes and make a test spray.
- Spray from a distance of 25-30 cm. Apply four thin coats, wait a while and apply again four thin coats.
- Spray at a temperature of 15-25°C. The paint hardens after two hours.
- After use, turn the bottle upside down and clean the valve by pressing for a few seconds.
High emissivity thermographic paints allow accurate non-contact temperature measurement. Many materials (metal, glass, some plastics) with a shiny surface and high reflectivity, with unknown or low emissivity, cause inaccurate or impossible measurement with the IR camera. LabIR® Paints thermographic paints create a homogeneous layer with high emissivity for very accurate measurements.
For specially designed paints, LabIR® Paints is the only company on the market that guarantees the emissivity for a given wavelength, the dependence of the emissivity on the viewing angle and also other characteristics: mechanical resistance, optical impermeability, etc.
Ref.HERP-LT-MWIR-BK-11