Description
4-inch FLIR Pins MR-PINS4
The 4-inch FLIR pins are 4-inch replacement insulated pins for the external pin probe on FLIR moisture meters. They are supplied in sets of 1 pair.
Their medium length allows for measuring moisture below the surface in walls, floors, and wood without reaching the bottom of an air cavity. Their small diameter requires little force to drive them in and leaves fewer marks on the material. The insulation extends all the way to the probe connection, so even if they are driven deep into an air cavity, the drywall does not affect the reading.
Main features
- 4 inches long (approx. 10.2 cm).
- Pins are insulated up to the connection with the probe.
- Hardened steel with a shot-blasted finish and a one-piece design that prevents them from bending.
- Abrasion-resistant insulation with improved adhesion to shot-blasted surfaces.
- Smaller diameter: less insertion force and less damage to the material.
Common applications
- Subsurface Measurements in Walls and Floors
- Wood and Building Materials
- Locating the Scope of a Data Breach
- Monitoring the Drying Process After Water Damage
Compatibility
Accessory listed by FLIR for the FLIR MR160 and MR176 moisture meters. They attach to the FLIR MR02 external pin probe.
REF: MR-PINS4
