FLIR E86-EST thermal imaging camera

Description

FLIR E86-EST thermal imaging camera
for human body temperature measurement

The FLIR E86-EST handheld thermal imaging camera is designed for screening individuals by measuring body temperature. The camera incorporates the FLIR EST™ (Elevated Skin Temperature) thermal detection system that locates and displays heat sources to quickly identify individuals with abnormally elevated skin temperature.

The FLIR E86-EST thermal camera features a highly accurate 464 x 348 pixel thermal resolution. The FLIR Screen-EST mode guides the camera operator in screening operations by providing the positioning reference of the scanned person on the screen. It also has an automatic sampling function to keep the average temperature up to date, and the camera clearly marks the test results (high body temperature = red, normal body temperature = green), simplifying the task of the screening station operators. In addition, the camera has a bracket attachment and external power supply, so it can also be used for fixed screening installations.

Immediate use system

With the FLIR E86-EST thermal imaging camera you are able to set up a temperature checkpoint in seconds: the camera has a minimum start-up time and has two batteries with a battery life of more than two and a half hours each, so you can start thermographic body temperature monitoring instantly and later, if desired, expand the checkpoint with video display, external power supply...

Accurate and fast detection

Although for the operator the operation of the FLIR E86-EST is a simple task, the FLIR E86-EST is a thermal imaging camera equipped with the latest generation of FLIR microbolometer sensors, with the highest accuracy in temperature measurement and automatic environmental drift compensation.

Privacy - compliance with the LOPD

When the FLIR Screen-EST function is activated, the FLIR E86-EST thermal camera does not allow images or personal information to be taken or stored, a key aspect for compliance with the Organic Law on the Protection of Personal Data.

Ref. 78521-2102, 78522-2202

FLIR Screen-EST™ - Introduction

Technical Data

Imaging and optical data	(For 24º lens)
Infrared resolution	464 × 348 pixels
UltraMax (super-resolution)	Yes
NETD	<40 mK @ 30°C (86°F)
Field of view	24° × 18°
Minimum focus distance	0.15 m (0.49 ft)
Minimum focus distance with MSX	0.5 m (1.64 ft)
Focal length	17 mm (0.67 in)
Spatial resolution (IFOV)	0.90 mrad/pixel
Lens identification	Automatic
f number	1.3
Image frequency	30 Hz
Focus	Continuous LDM One-shot LDM One-shot contrast Manual
Field of view match	Yes
Digital zoom	1-4× continuous

Detector data
Focal plane array/spectral range	Uncooled microbolometer/7.5-14 µm
Pitch detector	17 µm

Image presentation
Resolution	640 × 480 pixels (VGA)
Surface brightness (cd/m2)	400
Screen size	4 in
Viewing angle	80°
Color depth (bits)	24
Aspect ratio	4:3
Auto-rotation	Yes
Touchscreen	Optically bonded PCAP
Display technology	IPS
Cover glass material	Dragontrail®.
Programmable buttons	1
Viewfinder	No
Image adjustment	Automatic Automatic maximum Automatic minimum Manual

Image presentation modes
Infrared image	Yes
Visual image	Yes
MSX	Yes
Picture in Picture	Resizable and movable
Gallery	Yes

Measurement
Camera temperature range	15 to 45°C (59 to 113°F) Accuracy ±0.3°C (±0.5°F) when used in Screening mode The camera will provide contrast from -20 to 120 °C (-4 to 248°F), but no temperature information will be provided

Alarm
Color alarm (isotherm)	Above
Measurement function alarm	Audible/visual alarms (above/below) on any selected measurement function

Set-up
Color palettes	Iron Gray Rainbow Arctic Lava Rainbow HC
Setup commands	Local adaptation of units, language, date and time formats
Languages	21

Service functions
Camera software update	Using USB cable or SD card

Storage of images
Storage media	Removable memory; SD card (8 GB)
Time lapse (periodic image storage)	10 seconds to 24 hours (infrared)
Remote control operation	Using USB cable or Wi-Fi
Image file format	Standard JPEG, measurement data included. Infrared-only mode

Image annotations
Voice	60 seconds built-in microphone and speaker (and via Bluetooth) on still images and video
Visual image annotation	Yes
Image sketch	Yes: on infrared images only
Sketch	From touchscreen
METERLiNK	Wireless connection (Bluetooth) to: FLIR meters with METERLiNK
Compass	Yes
GPS	Yes: location data automatically added to every still image and the first frame in video from built-in GPS

Video recording in camera
Radiometric infrared-video recording	RTRR (.csq)
Non-radiometric infrared-video recording	H.264 to memory card
Visual video recording	H.264 to memory card

Video streaming
Radiometric infrared-video streaming (compressed)	Over UVC
Non-radiometric video streaming (compressed: IR, MSX, visual, Picture in Picture)	H.264 (AVC) over RTSP (Wi-Fi) MPEG4 over RTSP (Wi-Fi) MJPEG over UVC and RTSP (Wi-Fi)
Visual video streaming	Yes

Digital camera
Resolution	5 MP with LED light
Focus	Fixed
Field of view	53° × 41°
Video lamp	Built-in LED light

Laser pointer
Laser pointer	Yes1
Laser alignment	Position is automatically displayed on the infrared image
Laser distance meter	Activated by a dedicated button
Laser	Class 2, 0.05-40 m (1.6-131 ft) ±1% of measured distance

Data communication interfaces
Interfaces	USB 2.0, Bluetooth, Wi-Fi, DisplayPort
METERLiNK/Bluetooth	Communication with headset and external sensors
Wi-Fi	Peer to peer(ad hoc) or infrastructure (network)
Audio	Microphone and speaker for voice annotation of images
USB	USB Type-C: data transfer/video/power
USB standard	USB 2.0 High Speed
Video out	DisplayPort
Video connector type	DisplayPort over USB Type-C

Radio
Operating frequency	Bluetooth + EDR/LE: 2402-2480 MHz WLAN 2.4 GHz: 2412-2462 MHz WLAN 5 GHz: 5150-5350 MHz (DFS: only slave mode) Note that frequency band 5150-5350 MHz is for indoor use only, see national regulations.
RF output (EIRP)	Bluetooth + EDR/LE: < 10 dBm WLAN: < 17 dBm
Antenna	Integrated PIFA antenna (gain: maximum 1.4 dBi)

Power system
Battery type	Rechargeable Li-ion battery
Battery voltage	3.6 V
Battery operating time	> 2.5 hours at 25°C (68°F) and typical use
Charging system	In camera (AC adapter or 12 V from a vehicle) or two-bay charger
Charging time (using two-bay charger)	2.5 hours to 90% capacity with charging status indicated by LEDs
Charging temperature	0°C to 45°C (32°F to 113°F), except for the Korean market: 10°C to 45°C (50°F to 113°F)
External power operation	AC adapter 90-260 V AC, 50/60 Hz, or 12 V from a vehicle (cable with standard plug-optional)
Power management	Automatic shut-down and sleep mode

Environmental data
Operating temperature range	-15 to 50°C (5-122°F)
Storage temperature range	-40 to 70°C (-40 to 158°F)
Humidity (operating and storage)	IEC 60068-2-30/24 hours/95% relative humidity 25-40°C (77-104°F)/two cycles
EMC	ETSI EN 301 489-1 (radio) ETSI EN 301 489-17 EN 61000-6-2 (immunity) EN 61000-6-3 (emission) FCC 47 CFR Part 15 Class B (emission)
Radio spectrum	ETSI AT 300 328 FCC Part 15.249 RSS-247 Issue 2
Encapsulation	IP 54 (IEC 60529)
Shock	25g (IEC 60068-2-27)
Vibration	2g (IEC 60068-2-6)
Drop	Designed for 2 m (6.6 ft)
Safety	EN/UL/CSA/PSE 60950-1

Physical data
Weight (including battery)	1 kg (2.2 lb)
Size (L × W × H)	278.4 × 116.1 × 113.1 mm (278.4 × 116.1 × 113.1 mm) (11.0 × 4.6 × 4.4 in)
Battery weight	140 g (4.9 oz)
Battery size (L × W × H)	150 × 46 × 55 mm (5.9 × 1.8 × 2.2 in)
Tripod mounting	UNC ¼″-20
Housing material	PCABS with TPE, magnesium
Color	Black

Warranty and service
Warranty	http://www.flir.com/warranty/

Shipping information
Packaging, type	Cardboard box
Packaging, contents	Accessory Box I: Power supply for battery charger Power supply, 15 W/3 A Printed documentation Remote operation button SD card (8 GB) USB 2.0 A to USB Type-C cable with Power supply USB 2.0 A to USB Type-C cable, 1.0 m USB Type-C to HDMI and PD adapter USB Type-C to USB Type-C cable (USB 2.0 standard), 1.0 m Accessory box II: Accessory box III: Front protection fastener Hand strap bracket, left Hand strap bracket, right Screws Torx T10 wrench Carabiner hook Front protection Hand strap Lanyard strap, camera Lens cap strap Wrist strap Battery (2 ea) Battery charger Hard transport case Infrared camera with lens Lens cap, front Lens cap, front and rear (only for extra lenses)
Packaging, weight	5.8 kg (12.8 lb)
Packaging, size	500 × 190 × 370 mm (19.7 × 7.5 × 14.6 in)
EAN-13	4743254004771
UPC-12	845188023065
Country of origin	Estonia

FLIR E86-EST Thermal Imaging Camera - Features

FLIR E86-EST 24º or 42º Thermal Imaging Camera - Datasheets

FLIR E86-EST Thermal Imaging Camera - Quick Start Guide

FLIR E86-EST Thermal Imaging Camera - User's Manual

Box contents

FLIR E86-EST infrared camera with 24º or 42º lens
Button for remote operations.
Battery (2 units)
Battery charger with power supply
Rigid carrying case
Straps (hand and wrist)
Lens covers (front and rear)
Lens cleaning cloth
15 W/3 A power supply
Printed documentation
8 GB SD card
Torx screwdriver
Cables (USB 2.0 A to USB Type-C, USB Type-C to HDMI, USB Type-C to USB Type-C, USB 2.0 A to USB Type-C with power supply )

FLIR E86-EST thermal imaging camera

FLIR E86 thermal imaging camera

Description