Cámara termográfica FLIR A35sc – Kit de sobremesa

Brand:

Este producto está descatalogado.

.

Descripción

FLIR A35sc Cámara térmica fija

para laboratorio y I+D

La FLIR A35sc es una cámara de infrarrojos compacta que se entrega con software de análisis avanzado y dispone de un soporte de sobremesa, lo que la convierte en una solución ideal para laboratorios industriales y departamentos de I+D. Se puede integrar fácilmente con otros sistemas. La FLIR A35sc es de las pocas cámaras termográficas del mercado que integra una salida lineal de temperatura gracias al software compatible GenICam.

La cámara térmica FLIR A35sc tiene una resolución de 320×256 (81.920px) que ofrece imágenes de alta calidad con capacidad para detectar diferencias de temperatura de 0,05ºC.

Prestaciones cámara de infrarrojos FLIR A35sc

Muy económica

Compacta (40mm x 43mm x 106mm

GigE Vision y GenICam

Conector bloqueable GigE Vision

PoE (alimentación a través de Ethernet)

Imágenes de 8 bits de 320×256 píxeles transmitidas a 60 Hz, señal lineal

Imágenes de 14 bits de 320×256 píxeles transmitidas a 60 Hz, señal y temperatura lineales

Altas frame rates (60 Hz)

Posibilidad de sincronización entre cámaras

1x+1x GPIO

Compatible con cualquier software que soporte GenICam, incluyendo Stemmers Common Vision Blox y COGNEX Vision Pro

Ref. 73309-0102

FLIR A35 - Solución de sobremesa

FLIR A35 - Descripción general

FLIR A35 para visión artificial

Ficha Técnica

Imaging and optical data

IR resolution
320 × 256 pixels
Thermal sensitivity/NETD
< 0.05°C @ +30°C (+86°F) / 50 mK
Field of view (FOV)
48° × 39°
Minimum focus distance
3.2 cm (1.6 in.)
Focal length
9 mm (0.35 in.)
Spatial resolution (IFOV)
2.78 mrad
F-number
1.25
Image frequency
60 Hz
Focus
Fixed

Detector data

Detector type
Focal plane array (FPA), uncooled VOX microbolometer
Spectral range
7.5–13 µm
Detector pitch
25 µm
Detector time constant
Typical 12 ms

Measurement

Object temperature range
  • –25 to +135°C (–13 to 275°F)
  • –40 to +550°C (–40 to +1022°F)
Accuracy
±5°C (±9°F) or ±5% of reading

Measurement analysis

Atmospheric transmission correction
Automatic, based on inputs for distance, atmospheric temperature and relative humidity
Optics transmission correction
Automatic, based on signals from internal sensors
Emissivity correction
Variable from 0.5 to 1.0
Reflected apparent temperature correction
Automatic, based on input of reflected temperature
External optics/windows correction
Automatic, based on input of optics/window transmission and temperature
Measurement corrections
Global object parameters

Ethernet

Ethernet
Control and image
Ethernet, type
Gigabit Ethernet
Ethernet, standard
IEEE 802.3
Ethernet, connector type
RJ-45
Ethernet, communication
GigE Vision ver. 1.2
Client API GenICam compliant
Ethernet, image streaming
8-bit monochrome @ 60 Hz
  • Signal linear/ DDE
  • Automatic/ Manual
  • Flip H&V
14-bit 320 × 256 pixels @ 60 Hz
  • Signal linear/ DDE
  • Temperature linear
GigE Vision and GenICam compatible
Ethernet, power
Power over Ethernet, PoE IEEE 802.3af class 0 Power
Ethernet, protocols
TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose
General purpose
Digital input
1× opto-isolated, “0” <1.2 VDC, “1” = 2–25 VDC.
Digital output, purpose
General purpose output to ext. device (programmatically set)
Digital output
1× opto-isolated, 2–40 VDC, max. 185 mA
Digital I/O, isolation voltage
500 VRMS
Digital I/O, supply voltage
2–40 VDC, max. 200 mA
Digital I/O, connector type
12-pole M12 connector (shared with Digital synchronization and External power)
Synchronization in, purpose
Frame synchronization in to control camera
Synchronization in
1×, non-isolated
Synchronization in, type
LVC Buffer @3.3V, “0” <0.8 V, “1”>2.0 V.
Synchronization out, purpose
Frame synchronization out to control another FLIR Ax5 camera
Synchronization out
1×, non-isolated
Synchronization out, type
LVC Buffer @ 3.3V, ”0”=24 MA max, “1”= –24 mA max.
Digital synchronization, connector type
12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation
12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.
External power, connector type
12-pole M12 connector (shared with Digital I/O and Digital Synchronization )
Voltage
Allowed range 10–30 VDC

Environmental data

Operating temperature range
–15°C to +50°C (+5°F to +122°F)
Storage temperature range
–40°C to +70°C (–40°F to +158°F)
Humidity (operating and storage)
IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C (+77°F to +104°F)
EMC
  • EN 61000-6-2 (Immunity)
  • EN 61000-6-3 (Emission)
  • FCC 47 CFR Part 15 Class B (Emission)
Encapsulation
IP 40 (IEC 60529) with base support mounted
Shock
25 g (IEC 60068-2-27)
Vibration
2 g (IEC 60068-2-6)

Physical data

Weight
0.200 kg (0.44 lb.)
Camera size (L × W × H)
106 × 40 × 43 mm (4.2 × 1.6 × 1.7 in.)
Tripod mounting
1 × UNC ¼”-20 (with Base support accessory, included in the delivery box )
Base mounting
4 × M3 thread mounting holes (bottom)
Housing material
Magnesium and aluminum

Shipping information

Packaging, type
Cardboard box
List of contents
  • Hard transport case
  • Infrared camera with lens
  • Base support
  • Cable tie (2 ea.)
  • Ethernet cable CAT-6, 2m/6.6 ft (2 ea.)
  • FLIR ResearchIR Standard 4
  • Focus adjustment tool
  • Gooseneck
  • Mains cable kit (UK,EU,US)
  • PoE Injector (power over Ethernet)
  • Printed documentation
  • Table stand
Packaging, weight
Packaging, size
370 × 180 × 320 mm (14.6 × 7.1 × 12.6 in.)
EAN-13
7332558010570
UPC-12
845188011246
Country of origin
Sweden

Contenido de la caja

  • Cámara termográfica FLIR A35 con lente de 9mm
  • Soporte base, soporte de mesa y soporte cuello de cisne
  • Software FLIR ResearchIR Standard 4
  • Inyector PoE (alimentación a través de Ethernet)
  • Cable Ethernet CAT-6, 2m/6.6 ft (2 ut.)
  • Herramienta de ajuste del enfoque
  • Maletín de transporte
  • Documentción impresa